How to do the spray cleaning of industrial aluminum profile?

spray cleaning of industrial aluminum profile is widely used, because of complicated equipment, high technical requirements, the cleaning effect is not good, so how to do the cleaning of industrial aluminum profile:

Spray cleaning of aluminum alloy

1, Strengthen technological and the implementation of strict operation rules.

Every day to check running state, always observe the process parameters. Prohibition of workpiece stagnation in equipment, in order to avoid rust.

2, Pay attention to water cleaning quality.

In order to reduce the pollution degree of industrial aluminium profile, first of all should minimize the entrainment of workpiece cleaning contamination of procedure. Also should consider the multi-stage washing, usually two washing, some process or by pure water wash. After washing water level does not exceed the maximum contamination level 1/10 before cleaning workpiece, such residual liquid concentration two to wash the workpiece is only the original concentration, one percent. In the add water washing, adopting countercurrent supplement, to save water.

3, Bubble and its control.

In metal cleaning, bubble or removal process is very important for pre-processing, a certain amount of foam is of advantage to some process, but how much quality profiles cleaning of industrial aluminum agent does not depend on the bubble, and the jet in the inside, requiring cleaning agent is low foam, or batch production not normal.

4, Oil removing agent.

Because the cleaning agent effect of a single group of difference, so the industrial aluminum production using multicomponent cleaning agent compound, because by alkali, alkali, polymer inorganic salts, surfactants with appropriate to meet the cleaning agent, can play a clean respective characteristics, so it can improve the cleaning efficiency


Post time: May-22-2018