The function and mode of aluminum alloy connector

Angle code joint of aluminum alloy

Aluminum alloy section connector relates to aluminum alloy profile. A right angle piece, a slot T bolt, an elliptical shim and a nut are arranged on both sides of the right angle piece, and there are two orthogonal elliptical holes on the right angle part, one of which is an elliptical hole for passing through a groove T bolt, the other is an elliptical fixed hole for fixing the elliptical pad, and the slot T type screw is used. The nut of the bolt is passed through the elliptical hole of the right angle part and is clasp in the groove of the aluminum alloy section. The elliptical gasket is slid into the elliptical fixed hole with the slot T bolt into the right angle part, and the nut is locked with the slot T bolt. It can realize fast lap and fixing between aluminum alloy profiles, and easily adjust the relative position between aluminum alloy profiles, and has the advantages of strong connection, easy operation and simple structure.

There are many ways to connect aluminum profiles at right angles, some require punching and tapping on aluminum profiles, others only need sawing. We often have the following connection methods:

One, right angle connection

right angle connection

This method needs no tapping without punching, and cutting the aluminum profiles directly according to the required length, and then the right angle is fixed by the right angle connecting parts, bolts and nuts. The advantage of this installation method is that it is convenient and fast, and the disadvantage is that it affects the appearance, and can not install clapboards, glass and other accessories.

Two. Built-in connector connection

Built-in connector connection

The internal connection is usually a whistle connector. It only needs to punch holes in one of the sections, and the connection is convenient. The advantage is that the connector is hidden inside the aluminum profile, which does not affect the appearance and can be installed with partitions. There is also an advantage that can be modified to install a rack or machine, and can add profiles at random position, which belongs to a right angle connection.

Three, angle slot connector connection

angle slot connector connection

This kind of connection is also a way to hide the connection, but it does not need to punch the aluminum material, just insert the ends of the joint of the corner slot into the vertical two sections, and then tighten it with the fasten bolt. This connection is beautiful, generous and convenient. But the drawback is that there is no way of connection that is solid and suitable for frame combinations that are not very high load-bearing requirements.

 


Post time: Apr-20-2018