Advantages of aluminum alloy strip
Light and soft. The density of aluminum is 2171 g/ cm3, about 1/3 of the steel density (7187 g/ cm3), and the young’s modulus is also about 1/3 of the steel.
The strength is good. The tensile strength of pure aluminum is about 80 MN/ m2, which is 1/5 of low carbon steel. However, after heat treatment and alloying, the strength will increase greatly. The minimum tensile strength of the aluminum alloy car body, 6005A – T6, is 360 MN/ m2, which can reach the corresponding strength of low carbon steel.
Good corrosion resistance. One of the characteristics of the aluminum alloy is that a dense layer of oxide film will be formed on the surface of the air, which prevents corrosion, so the corrosion resistance is good. If the method of “alumina membrane treatment” is applied, the corrosion can be prevented.
Good processing performance. The extrusion performance of the rolling stock is good, and it is also easy to process and bend two times.
It is easy to regenerate. The melting point of aluminum is low (660 C), and the regeneration is simple. There is no pollution in the disposal of waste, which is beneficial to environmental protection and is in line with the strategy of sustainable development.
Application | Protecting&decorating the edges of tile,marble.UV board,glass,ect. |
Length | 2.44/ 2.5/ 2.7/ 3m ,also can be done especially for customer’s requirement |
Height | 8/ 10/ 12 mm |
Thickness | 0.4mm-2mm |
Grade | Alloy 6000 Series, most like 6063, 6061 and so on. |
Temper | T3-T8, most like T5, T6 |
Surface treatment | optional (mill finish, anodizing, eletrophoretic coating, powder coating, PVDF coationg, thermal-break, further processing amd so on) |
Color | Silver, Gold, White, Black, Bronze or any other you preferred |
Application | constructive windows and doors, curtain walls, decoration, furniture, electronic, steamship andother various industries. |
Mould and Section Size | 0-480mm, design and do the mould according to your certain request and sample |
Length | standard: generally 6m (or 5.8m or your specified) |
Packing | export standard packing (usally by kraft paper, PE film EPE foam and also thereafter by cartons if needed) |
Delivery time | geneally within 7 days to do the mould (according to your sample or your detail section drawing) and express the extrusions sample, then about 15 days to mass production after confirmation the sample |
Price Terms | FOB or CIF terms according to your certain request |
Payment | T/T or irrevocable L/C at sight. |